Role Description As an Analog Design Engineer at Tylsemi, you will design and deliver high-performance analog and mixed-signal circuits that enable robust, manufacturable silicon. This role spans a wide experience range (5–30 years) and is ideal for engineers who combine strong fundamentals with practical execution—translating system requirements into silicon-ready designs, validating performance across corners, and partnering closely with layout, verification, test, and product teams to drive first-time-right outcomes. - Own end-to-end analog block development: requirements definition, architecture, transistor-level design, simulation, and signoff - Design and optimize analog/mixed-signal circuits such as amplifiers, references, biasing, regulators (LDO/DC-DC support), comparators, oscillators/clocking, data converters (as applicable), and sensor/AFE front ends - Drive performance across PVT corners, mismatch/Monte Carlo, aging/reliability considerations, and realistic loading/interaction with surrounding blocks - Partner with layout to guide floorplanning, matching/guarding strategies, parasitic-aware design, and post-layout closure (PEX) - Develop and maintain testbenches, modeling collateral, and documentation to enable efficient verification and integration - Support silicon bring-up and debug: correlate lab data to simulations, root-cause issues, and implement design fixes or ECOs - Collaborate cross-functionally with digital, firmware, DFT, validation, and product engineering to ensure system-level success - Contribute to design methodology improvements: reusable circuits, checklists, signoff flows, and best practices that scale across programs Qualifications - 5+ years of experience in analog or mixed-signal IC design (scope and ownership aligned to experience level) - Strong fundamentals in analog circuit design, device physics, noise, stability/compensation, and feedback systems - Proficiency with industry-standard EDA tools and simulation flows (e.g., Spectre/HSPICE, ADE, waveform/debug tooling) - Experience closing designs through post-layout parasitics and across process/voltage/temperature corners - Ability to translate ambiguous system needs into clear block requirements and executable design plans - Strong debugging skills and comfort working with lab/validation teams to correlate silicon to simulation - Clear communication and high ownership in cross-site, cross-functional environments Requirements - Experience with high-speed or precision analog (low-noise, low-offset, high-linearity) depending on product needs - Background in power management (LDOs, bandgaps, references, protection, start-up, transient response) - ADC/DAC, PLL/clocking, or SERDES-adjacent analog experience - Familiarity with reliability/ESD considerations and design-for-manufacturability practices - Experience supporting production ramp: yield learning, characterization, and test correlation Success in This Role Looks Like - Analog blocks meet spec with margin across PVT, mismatch, and post-layout effects - Design reviews are crisp: requirements, tradeoffs, and risks are clearly articulated and managed - Silicon bring-up converges quickly through strong correlation, structured debug, and decisive fixes - Cross-functional partners (layout, verification, test, validation) can execute efficiently with clear interfaces and documentation - Reusable design collateral and improved methodology reduce cycle time and increase first-pass success

Role Description We are seeking an experienced Independent Hardware Engineer to take end-to-end ownership of hardware designs across the full development lifecycle. This role is ideal for a senior engineer with strong autonomy, accountability, and engineering discipline. The successful candidate will own key hardware deliverables, make independent technical decisions, identify risks early, and deliver results against defined project milestones. - Own hardware design activities from schematic design and component selection through bring-up, validation, failure analysis, and sustaining support. - Develop structured bring-up plans, test procedures, debug strategies, and validation documentation. - Perform local hardware bring-up using available lab equipment and coordinate additional testing through remote or centralized laboratories. - Work closely with remote hardware, software, FPGA, systems, manufacturing, and lab teams. - Analyze test results, troubleshoot hardware issues, and document findings clearly. - Present and defend hardware designs in schematic reviews, milestone reviews, readiness reviews, and technical surveys. - Communicate design decisions, risks, trade-offs, open issues, and validation status clearly. - Write basic microcontroller firmware in C/C++ to support bring-up and validation, including GPIO control and peripheral configuration such as I²C, SPI, UART, ADCs, and timers. - Support FPGA-based system integration by reading existing VHDL/Verilog code and assisting with basic debug or minor updates when needed. Qualifications - Proven experience in digital and mixed‑signal hardware design - At least 6+ years of experience - Hands‑on board bring‑up and hardware debug experience - Ability to write basic microcontroller code for hardware validation - Familiarity with FPGA systems and HDL at an integration/debug level - Experience presenting designs in technical reviews and surveys - Strong documentation, communication, and self‑management skills - Ability to work effectively in a remote, high‑trust environment

• Aplicar los conocimientos técnicos y mecánicos de trabajo para realizar todas las fases de la observación y el registro de datos de pruebas técnicas en apoyo de proyectos de ingeniería. • Usar manuales técnicos estandarizados y construir plantillas de base para ejecución • Recopilar datos de campo que consisten en mantener un registro cronológico preciso y detallado de todas las operaciones de elementos de prueba y datos relacionados con el mantenimiento. • Analizar equipos y funcionamiento del terminal para transformar la información al formato necesario para el sistema INFOR. • Implementar standards vopak para la correcta transformación de información en el sistema INFOR. • Verificar y corregir codificación existente en el sistema INFOR teniendo en cuenta estándares. • Solicitar y verificar información teniendo en cuenta el alcance del Proyecto. • Verificar y corregir planes de Mantenimiento. • Realizar recolección de información como: punto de aislamientos, locaciones y zonas, para implementación de proyectos como permiso de trabajo. • Crear y actualizar posiciones finales en árbol de activos existentes, en plantilla de carga de datos estandarizada para envío a la división para revisión/aprobación. • Recolección de datos en campo, en las terminales asignadas por la división de américa, para estructuración de árbol de activos de acuerdo a lo real instalado en planta (disponibilidad de viaje al exterior) • Apoyar en la implementación del módulo Control of Work en INFOR, identificando puntos de bloqueo y etiquetado, posibles daños a equipos, y árbol de peligro y riesgos.

• Create sheet sets and perform design work for multiple engineering disciplines supporting renewable energy and substation projects. • Acquire and apply knowledge of renewable energy system layouts and components such as modules, racking, inverters, and Balance of Systems (BOS). • Ensure compliance with company, industry, trade, and jurisdictional safety standards, practices, codes. • Manage time efficiently across multiple projects. • Coordinate with clients and project managers on their expectations. • Work under the guidance of more senior staff. • Work on or lead small projects or portions of larger projects in preparation of drawings and engineering documentation. • Attends project meetings and presents specific aspects of engineering assignments. • Collaboratively use judgment to determine adaptations in methods for nonroutine aspects of assignments. • Perform essential duties including meeting deliverables and deadlines. • Perform additional duties as assigned or directed.