divcon

• Provide technical leadership and oversight for the design and implementation of PLC-based control systems • Lead the design and development of control systems, including control panel layouts • Develop complete PLC I/O architectures and prepare construction documentation • Coordinate with Project Managers, engineers, programmers, and field teams • Perform QA/QC reviews of drawings and as-built documentation

About the role: The Delta Controls Service Technician is responsible for providing on-site service, troubleshooting, maintenance, and support for Delta Controls Building Automation Systems (BAS). This role focuses on hands-on field work, ensuring customer systems operate reliably, efficiently, and in accordance with Divcon standards. This is a customer-facing position requiring strong technical aptitude, practical problem-solving skills, and a commitment to service excellence. The technician will primarily support customers in the Chicago market. Key Responsibilities: - Perform on-site troubleshooting, diagnostics, and repair of Delta Controls BAS, including controllers, sensors, actuators, and networked devices. - Support commissioning, system startups, point-to-point verification, and functional testing under guidance of engineering or senior technicians. - Respond to service calls, alarms, and customer-reported issues in a timely and professional manner. - Perform firmware updates, configuration changes, and minor programming adjustments as directed. - Conduct scheduled preventative maintenance, system inspections, and health checks. - Identify failing or at-risk components and recommend corrective actions. - Assist with system optimization to improve performance, reliability, and energy efficiency. - Serve as Divcon’s on-site representative, maintaining a professional and customer-focused approach at all times. - Clearly explain system issues, findings, and corrective actions to customers in non-technical terms. - Coordinate with customers regarding access, scheduling, and service completion. - Accurately document service activities, findings, and resolutions in Divcon’s service management system. - Record parts usage, system changes, and follow-up recommendations. - Communicate recurring issues or improvement opportunities to service leadership and engineering teams. - Work closely with Service Engineers, Project Teams, and Controls Engineers for advanced troubleshooting or escalations. - Support handoff between project completion and ongoing service contracts. - Participate in knowledge sharing and continuous improvement initiatives. Qualifications: - 2+ years of Delta Controls or Niagara AX/N4 exposure. - Experience with Delta Controls (preferred) or similar BAS platforms (Tridium Niagara, Schneider, Siemens, Johnson Controls). - Solid understanding of HVAC equipment, control devices, and BAS field wiring. - Basic networking knowledge (IP addressing, BACnet, MSTP). - Ability to read wiring diagrams, control drawings, and point lists. - Strong troubleshooting skills and mechanical/electrical aptitude. - Valid driver’s license and ability to travel locally. Preferred: - Experience in data centers, healthcare, or mission-critical facilities. - Familiarity with commissioning tools, hand-held meters, and BAS diagnostic software. - Trade school or technical certification in HVAC, controls, or electronics.

About the role: The Delta Controls Service Technician is responsible for providing on-site service, troubleshooting, maintenance, and support for Delta Controls Building Automation Systems (BAS). This role focuses on hands-on field work, ensuring customer systems operate reliably, efficiently, and in accordance with Divcon standards. This is a customer-facing position requiring strong technical aptitude, practical problem-solving skills, and a commitment to service excellence. The technician will primarily support customers in the Houston market. Key Responsibilities: - Perform on-site troubleshooting, diagnostics, and repair of Delta Controls BAS, including controllers, sensors, actuators, and networked devices. - Support commissioning, system startups, point-to-point verification, and functional testing under guidance of engineering or senior technicians. - Respond to service calls, alarms, and customer-reported issues in a timely and professional manner. - Perform firmware updates, configuration changes, and minor programming adjustments as directed. - Conduct scheduled preventative maintenance, system inspections, and health checks. - Identify failing or at-risk components and recommend corrective actions. - Assist with system optimization to improve performance, reliability, and energy efficiency. - Serve as Divcon’s on-site representative, maintaining a professional and customer-focused approach at all times. - Clearly explain system issues, findings, and corrective actions to customers in non-technical terms. - Coordinate with customers regarding access, scheduling, and service completion. - Accurately document service activities, findings, and resolutions in Divcon’s service management system. - Record parts usage, system changes, and follow-up recommendations. - Communicate recurring issues or improvement opportunities to service leadership and engineering teams. - Work closely with Service Engineers, Project Teams, and Controls Engineers for advanced troubleshooting or escalations. - Support handoff between project completion and ongoing service contracts. - Participate in knowledge sharing and continuous improvement initiatives. Qualifications: - 2+ years of Delta Controls or Niagara AX/N4 exposure. - Experience with Delta Controls (preferred) or similar BAS platforms (Tridium Niagara, Schneider, Siemens, Johnson Controls). - Solid understanding of HVAC equipment, control devices, and BAS field wiring. - Basic networking knowledge (IP addressing, BACnet, MSTP). - Ability to read wiring diagrams, control drawings, and point lists. - Strong troubleshooting skills and mechanical/electrical aptitude. - Valid driver’s license and ability to travel locally. Preferred: - Experience in data centers, healthcare, or mission-critical facilities. - Familiarity with commissioning tools, hand-held meters, and BAS diagnostic software. - Trade school or technical certification in HVAC, controls, or electronics.

• Build accurate and visually consistent 3D models of mechanical, electrical, and building systems equipment (e.g., air handlers, chillers, pumps, VAVs) • Follow established asset templates to ensure consistency in layout, structure, and appearance • Apply proper geometry, materials, and naming conventions to support BIM and visualization integration • Contribute to the development and maintenance of a standardized 3D asset library • Organize files, folders, and metadata for efficient access and reuse • Participate in quality checks to ensure all assets meet visual and technical standards • Work with senior modelers and engineers to understand equipment layouts and design requirements • Revise models based on feedback from project teams • Support integration of models into larger building and system environments • Ensure all deliverables meet internal standards for scale, level of detail, and visual quality • Maintain clean, lightweight models optimized for BIM performance and rendering • Follow established workflows, templates, and modeling best practices

• Lead the design and development of PLC control systems using platforms such as Rockwell / Allen-Bradley (Studio 5000). • Establish and maintain PLC programming standards, reusable code libraries, naming conventions, and best practices. • Define system architecture including control strategies, I/O structures, network design, and redundancy approaches. • Ensure consistency and quality across all PLC deliverables through design reviews and code validation. • Own PLC scope across multiple projects, from design through commissioning and turnover. • Develop and implement control logic for HVAC systems, central plants, and critical infrastructure systems. • Support system integration with SCADA platforms (e.g., Ignition), BMS, and EPMS systems. • Collaborate with project managers, engineers, and field teams to ensure alignment on scope, schedule, and deliverables. • Lead troubleshooting and resolution of complex control system issues during startup and commissioning. • Mentor and guide junior and mid-level PLC engineers, providing technical direction and support. • Review engineering work and provide feedback to ensure adherence to standards and best practices.

• Lead day-to-day execution of PLC and automation projects across multiple job sites, with significant time spent on-site supporting field teams and commissioning activities. • Manage full project lifecycle including planning, scheduling, budgeting, procurement, execution, and turnover. • Coordinate closely with PLC engineers, SCADA developers, field technicians, subcontractors, and commissioning teams to ensure alignment and progress. • Serve as the primary point of contact for clients during project execution, providing updates, resolving issues, and managing expectations. • Track project performance across schedule, cost, quality, and risk, and provide regular reporting to internal leadership. • Support commissioning efforts, including system startup, troubleshooting coordination, and integration sequencing across multiple vendors. • Manage change orders, RFIs, and contract documentation to ensure accurate scope and financial control. • Review project deliverables including control sequences, I/O lists, and system integration requirements to ensure alignment with project goals. • Coordinate integration between PLC systems, SCADA platforms (e.g., Ignition), and facility systems (BMS, EPMS). • Identify and mitigate risks related to installation, commissioning timelines, and system performance. • Ensure compliance with Divcon’s internal systems, safety standards, and documentation protocols.

About the role: We are seeking a skilled and motivated PLC Field Technician with strong hands‑on experience in PLC‑based control systems, industrial networking, and field commissioning. This role is responsible for performing installation, configuration, troubleshooting, and startup of PLC systems across industrial automation and building management system (BMS) environments. The PLC Field Technician plays a critical role in executing fieldwork, supporting commissioning activities, documenting technical changes, and ensuring all systems are installed according to engineering specifications. This position requires solid technical ability, strong communication skills, and the capacity to manage multiple priorities in fast‑paced construction and industrial settings. Key Responsibilities: PLC Installation, Configuration & Commissioning - Perform field installation, wiring verification, loop checks, and commissioning of PLC systems for industrial automation and BMS applications. - Troubleshoot PLC programs, field devices, and communication issues to ensure proper operation and integration with SCADA/HMI platforms (e.g., Ignition). - Execute startup plans in coordination with engineers and project managers, ensuring systems are installed and configured per design specifications. - Support Senior and Lead PLC Technicians during commissioning and assist in resolving technical issues during startup. Industrial Networking & Protocols - Configure and troubleshoot industrial communication protocols including Modbus/UDP, Modbus/IP, Ethernet/IP, BACnet, and OPC UA. - Set and validate IP addresses, subnet masks, gateways, VLAN assignments, and port schedules. - Work with industrial network architectures such as linear networks, star topologies, and device‑level rings. Documentation & Project Coordination - Develop accurate as‑built documentation, redlines, and commissioning checklists. - Communicate technical changes and field findings to Senior and Lead PLC Technicians and PLC Engineers. - Manage materials, timelines, and task priorities across multiple active job sites. - Collaborate with engineers and project managers to ensure alignment of technical deliverables and project requirements. Qualifications: - 2+ years of hands on experience with PLC systems in industrial or construction environments. - Proficiency with Allen Bradley PLC platforms; preferred exposure to Siemens or Schneider Electric systems. - Working knowledge of Studio 5000, FactoryTalk Linx, RS Linx Classic, RSNetWorx, and FactoryTalk Activation Manager. - Experience with SCADA/HMI systems and industrial networking fundamentals. - Familiarity with industrial communication protocols: Modbus/IP, Modbus/UDP, Ethernet/IP, MQTT, OPC UA, BACnet. - Ability to read and interpret electrical schematics, network diagrams, and mechanical plans. - Strong communication, organization, and problem solving skills. - Willingness to travel to project sites (up to 85%).

About the role: The BAS Controls Programmer is responsible for developing, configuring, testing, and deploying building automation control systems used in commercial, industrial, and mission-critical facilities. This role transforms mechanical and electrical design intent into fully functional control logic using DDC, PLC, and BAS programming tools. You will work closely with design engineers, project managers, and field technicians to ensure every system operates safely, efficiently, and according to specification. Key Responsibilities: - Develop and program DDC controllers, including logic, sequences, alarms, schedules, and trends. - Build and configure controller databases, graphics, navigation, and user interfaces. - Implement integration using BACnet, Modbus, and other open protocols. - Configure and test network settings, IP addressing, routing, and device bindings. - Create and update programming libraries, templates, and standards. - Support field technicians during startup, commissioning, point-to-point testing, and functional testing. - Troubleshoot communication issues, device failures, programming errors, and performance gaps. - Perform on-site adjustments to optimize HVAC and mechanical system performance. - Validate I/O lists, mechanical schedules, control drawings, and sequences of operation. - Maintain organized project files including backups, version control, release notes, and as-built documentation. - Participate in internal design and code reviews, contributing to programming best practices. - Coordinate with engineers, PMs, and installers to clarify design intent and execution requirements. - Implement third-party integrations (meters, lighting, power monitors, VFDs, chillers, boilers, AHUs, RTUs, etc.). - Develop and modify system graphics that reflect the mechanical system accurately. - Support complex system architectures including EPMS, SCADA, PLC-based subsystems, and networked BAS deployments. Qualifications: - Experience programming building automation systems (Delta Controls, Tridium Niagara, Johnson Controls FX, Siemens, Schneider, Honeywell, Automated Logic, Distech, etc.). - Strong understanding of HVAC systems: AHUs, VAVs, chillers, boilers, RTUs, pumps, cooling towers. - Working knowledge of BACnet/IP, BACnet MS/TP, Modbus RTU/TCP, device addressing, and network configuration. - Ability to interpret MEP drawings, wiring diagrams, and sequences of operation. - Proficiency with BAS programming tools, configuration utilities, and software loaders. - Strong troubleshooting and problem-solving skills in live controls environments. Preferred Qualifications: - Experience with Delta Controls software tools and certification (Fundamentals, Advanced Applications). - Experience with Allen-Bradley PLCs, Ignition, or SCADA systems. - Familiarity with server setup, virtual machines, or OT networks. - Associate or bachelor’s degree in Electrical, Mechanical, Controls, or related field. - Experience supporting mission-critical environments (data centers, healthcare, pharma, labs, etc.).

About the role: We are seeking a DDC Graphics Specialist to design and develop advanced graphical user interfaces for BAS, BMS, EMS, and EPMS systems. This role creates modern, intuitive, and high-performance graphics that support building operators in commercial and mission-critical environments. Ideal candidates have experience in building automation, HVAC systems, and GUI development using industry-standard design tools and SCADA visualization platforms. Key Responsibilities: - Complete all graphics design and development within allocated project hours and established timelines. - Design visually appealing, dynamic, easy-to-use, and modern-looking graphic solutions for building operators per client and company standards. - Ensure timely delivery of graphics packages to jobsites to meet project completion schedules. - Multi-task effectively across multiple design projects simultaneously while maintaining quality standards. - Identify and report quality control issues to project managers and engineering management in a timely manner. - Maintain consistent response times and follow-up communications with assigned project managers. - Deliver accurate and timely graphic design deliverables that meet or exceed client expectations. - Independently design and develop sophisticated DDC graphics within project timelines and budget constraints. - Create modern, intuitive graphical user interfaces that enhance operator efficiency and system monitoring capabilities. - Collaborate with project managers, control technicians, and engineering teams to deliver comprehensive graphics solutions. - Support multiple concurrent projects while maintaining consistent quality and delivery standards. - Provide technical problem-solving expertise to develop optimal visualization solutions for end-users. - Ensure proper documentation for long-term customer servicing and system maintenance. - Maintain comprehensive revision tracking for up-to-date project packages to support continual updates and system expansions. - Develop and maintain graphics libraries and templates for consistent implementation across projects. Qualifications: - High School diploma or equivalent required; Associates degree or 1-2 years of vocational technical training preferred. - 1-2 years of experience with building automation systems and DDC applications. - 1-2+ years of experience in graphical software development and interface design. - Strong understanding of BAS/BMS/EMS/DDC/EPMS systems and their operational requirements. - Proficiency in graphics software applications such as Photoshop, Adobe Illustrator, or equivalent design tools. - Experience with HVAC systems, mechanical equipment, and building automation principles. - Excellent technical problem-solving skills and ability to work independently. - Strong time management and organizational skills with ability to handle multiple concurrent projects. - Exceptional communication skills and ability to collaborate effectively with cross-functional teams. - High degree of integrity and mature judgment in decision-making processes. Preferred Qualifications: - Experience with DGLogik/DGLux5 Designer, ECLYPSE Designer, or ENVYSION Designer platforms. - Experience with specialized graphics tools such as Orcaview Illustrator or Sweet Home 3D. - Experience with web-based graphics development and responsive design principles. - Knowledge of 3D modeling and visualization techniques for facility layouts. - Experience with version control systems and collaborative development workflows.

About the role: We are seeking an experienced and highly motivated Lead PLC Field Technician with a strong background in PLC-based control systems. This is a hands-on leadership role responsible for the installation, configuration, and commissioning of programmable logic controller (PLC) systems. You’ll mentor technicians in the field, oversee integration and startup efforts, and serve as a key technical point of contact for both internal teams and clients. Key Responsibilities: - Lead field installation, wiring, and commissioning of PLC systems for industrial automation and BMS applications. - Troubleshoot PLC programs and field devices, ensuring smooth communication with SCADA or HMI platforms (e.g., Ignition). - Coordinate with engineers and project managers to execute startup plans and ensure systems are installed per design specs. - Interface with clients during commissioning, provide support during startup, and resolve technical issues. - Configure protocols such as Modbus, BACnet, and OPC UA across various devices. - Develop as-built documentation, redlines, and commissioning checklists. - Mentor and coach junior technicians in the field. - Manage materials, timelines, and priorities across multiple active job sites. Qualifications: - 8+ years of hands-on experience with PLC systems in construction or industrial settings. - Proficiency with PLC platforms such as Allen-Bradley, Siemens, or Schneider Electric. - Experience with SCADA/HMI systems and industrial networking. - Familiarity with protocols like Modbus, MQTT, OPC UA, and BACnet. - Ability to read and interpret electrical schematics, network diagrams, and mechanical plans. - Proven ability to lead field crews, delegate tasks, and manage competing priorities. - Excellent communication and problem-solving skills. - Willingness to travel to project sites (85%)