Role Description Everforth ECS is seeking an Electrical Engineer to work remotely. Please Note: This position is contingent upon additional funding. Everforth ECS is looking for someone who has had design integration experience with shipboard electrical systems to become a valuable member of an engineering team providing vessel construction management of research ships. This is a fully remote position which will require some travel. Overseas travel is a possibility. - Provide technical evaluation of vendor proposed system designs. - Assess the design maturity of deliverables. - Determine expected system performance to meet operational requirements. - Assess electrical and/or control system designs using SKM or other industry software. - Write technical papers on the technical risk of system designs being able to meet ABS/USCG/IMO design standards. - Additional duties may include drawing review/modification, shipboard material inspections, and development of ship alteration packages. - Cost estimation of proposed ship construction changes. - Site visits to perform root cause analysis of shipboard failures. Salary range is based on years of experience: $70,000-$145,000. Qualifications - BS degree in Electrical Engineering or other engineering disciplines. - Must be a US Citizen with the ability to pass and obtain a Public Trust clearance. - Minimum of six (6) years’ experience in the shipbuilding industry in the electrical and/or controls discipline. - Ability to perform system design calculations and verification. - Experience supporting ship concept/preliminary design development and performing feasibility studies. - Ability to review/modify drawings for technical completeness. - Experience with ShipConstructor, SKM, Navisworks, SolidWorks and other ship design software. - Understanding of ABS, USCG and other regulatory agencies rules as they pertain to shipboard electrical systems. - Ability to work remotely/independently with minimal supervision.

• Support all project phases (pre-design, design, construction, closeout) • Review plans, specifications, and shop drawings • Ensure compliance with VA standards and applicable codes • Evaluate power distribution, emergency power, and critical systems • Review construction activities for compliance • Identify deficiencies and non-conforming work • Support RFIs, submittals, and change orders • Conduct site inspections • Track deficiencies and ensure resolution • Support testing and commissioning • Support project scheduling efforts • Coordinate with contractors and stakeholders • Assist in resolving technical issues impacting delivery • Maintain project documentation • Support reports and technical evaluations • Provide input to leadership and contracting teams • Evaluate construction impacts on medical operations • Identify risks related to power systems and infrastructure • Support phasing strategies to maintain patient care

Role Description Echo Power is seeking a self-motivated Electrical Relay Testing Technician with experience in relay testing, commissioning, and maintenance. In this role, you will support substation and power generation projects, contributing across the full project lifecycle—from design support through field commissioning and in-service operations. This position includes a mix of technical work and field engagement to ensure safe and reliable system performance. Key Responsibilities - Perform testing, commissioning, and maintenance of protective relays and associated equipment - Develop and implement protective relay settings and commissioning documentation - Conduct functional testing, troubleshooting, and repair of relay systems - Support retrofit design and implementation of relay systems in substations and power plants - Assist in the development and execution of commissioning work plans - Maintain accurate documentation of testing and maintenance activities - Ensure compliance with safety standards and company policies Qualifications - Strong knowledge of power generation and transmission equipment, including relays, controls, transformers, and protection systems - Experience with instrumentation, process control systems, and transmitters (pressure, flow, temperature) - Familiarity with HART-based transmitters and PLC fundamentals (preferred) - Experience with 480V motor controls and substation equipment installation/commissioning - Ability to produce as-built documentation using AutoCAD - Strong troubleshooting and problem-solving skills - Proficiency with Microsoft Office and working knowledge of AutoCAD - Experience with relay testing platforms and associated software - Strong communication skills and ability to work with customers and field teams - Self-motivated with a strong work ethic and ability to work in both field and office environments Requirements - High school diploma required - 5+ years of relevant experience in electrical testing, installation, and commissioning - NICET certification preferred Benefits - Salary: $75,000 – $112,000 annually (based on education and experience) - Annual bonus potential - Flexible working hours - Health, dental, and vision insurance - Company-paid disability and life insurance - Four weeks of vacation plus 7 company-paid holidays - 401(k) plan with company match - Auto allowance - Family-oriented culture - Career growth opportunities

Job Description Our employees work on the world's most advanced electronics - from detecting threats for F-35 pilots to illuminating the night for soldiers. Spanning air, land, sea, and space, we are developing the technology of tomorrow, delivered today. Drawing strength from our differences, we're innovating for the future. And you can, too. Due to continued growth, BAE Systems has an opening for a Principal Electrical Board Design Engineer with Space experience in Manassas, VA. BAE Systems is one of the world's leading defense contractors and a stable Fortune 500 Company. This specific opening is within our Space Systems product line. The Manassas, VA site is the headquarters of the BAE Systems Space Systems product line and has a long heritage of premier Radiation Hardened processors dating back to the 90s servicing satellites as well as extraterrestrial missions including all of the Mars Rovers. The position will be expected to perform all aspects of electrical and digital board design spanning from taking a requirements document and systems block/architecture diagram and designing a solution. The solution would entail component selection, PCB stackup, creating symbols and footprints, schematic capture, layout/placement, and routing. We have separate groups for Component Engineering and Gerber generation, but both are valuable skillsets that would be utilized if available. Our boards/systems include many different types of signals and interfaces such as ADC/DAC interfaces, I2C/SPI interfaces, clocks, DDR3/DDR4 memory, PCIe, JTAG, and high speed SERDES. For our box-level designs, we commonly use SpaceVPX standards for our backplanes and connectors. Experience with VITA/SpaceVPX standards is recommended, but not required. Our designs often have numerous cards talking together within a box. So experience designing backplanes and with cabling is helpful, but not required. Our typical board applications are in the 100s of MHz frequency range with a few higher speed interfaces for DDR3/DDR4 memories or SERDES spanning into the 1-30Gbps range. We commonly use daughter cards either because we are running short on space or because we want to add flexibility for re-use in similar applications. Our designs may have multiple clocks. They often have FPGAs, processors, and other CGA components with packages with I/O counts as high as 1752 at 1mm spacing. The number of layers is typically in the 22-28 layer range to account for the high signal density. In order to ensure our customers that our designs will work in their applications (typically satellites, but also missions to other planets or moons), we perform a fair amount of Worst Case Analysis. These types of analysis include Logic Compatibility, Power Dissipation, Power Sequencing, Tri-State Analysis, ESD, etc. As a board designer, you will feed input to these teams and may also help out with the analyses as well. Our Board Designers work alongside our System Engineers, Component Engineers, WCA team, FPGA/RTL designers, and Mechanical Engineers to ensure we are building a reliable product and performing thorough design and analysis. This position will be in a team environment. As an experienced Board Design Engineer, you will have the opportunity to mentor junior engineers in a fast growing organization. Our flexible work environment (including a 9/80 schedule) provides a work life balance that affords you the opportunity to change the world while maintaining your personal life. We put our customers first - exemplified by our mission: "We Protect Those Who Protect Us®". This position is open to folks with various levels of experience and could be modified to entertain more or less experience as appropriate. Required Education, Experience, & Skills - Board Design Experience - Experience working on larger Engineering teams - Strong written and oral communication skills - Self-starter and a good team player - Ability to mentor and willingness to be mentored - Strong debug and problem solving skills - Bachelor's Degree in Electrical or Computer Engineering Preferred Education, Experience, & Skills - Board design experience with Cadence Allegro - Experience with Power Integrity and Signal Integrity (using Cadence Sigrity, MGC Hyperlynx or a similar tool) - Experience with Gerber generation - Experience with interfaces such as: ADC/DACs, SerDes, PCIe, JTAG, DDRx - Advanced degree in Electrical or Computer Engineering - Experience with generating scripts (Perl, Tcl, Python) - Experience in hardware design and hands-on lab debug - Experience in performing Worst Case Analysis Pay Information Full-Time Salary Range: $118095 - $200762 Please note: This range is based on our market pay structures. However, individual salaries are determined by a variety of factors including, but not limited to: business considerations, local market conditions, and internal equity, as well as candidate qualifications, such as skills, education, and experience. Employee Benefits: At BAE Systems, we support our employees in all aspects of their life, including their health and financial well-being. Regular employees scheduled to work 20+ hours per week are offered: health, dental, and vision insurance; health savings accounts; a 401(k) savings plan; disability coverage; and life and accident insurance. We also have an employee assistance program, a legal plan, and other perks including discounts on things like home, auto, and pet insurance. Our leave programs include paid time off, paid holidays, as well as other types of leave, including paid parental, military, bereavement, and any applicable federal and state sick leave. Employees may participate in the company recognition program to receive monetary or non-monetary recognition awards. Other incentives may be available based on position level and/or job specifics. About BAE Systems Electronic Systems BAE Systems, Inc. is the U.S. subsidiary of BAE Systems plc, an international defense, aerospace and security company which delivers a full range of products and services for air, land and naval forces, as well as advanced electronics, security, information technology solutions and customer support services. Improving the future and protecting lives is an ambitious mission, but it's what we do at BAE Systems. Working here means using your passion and ingenuity where it counts - defending national security with breakthrough technology, superior products, and intelligence solutions. As you develop the latest technology and defend national security, you will continually hone your skills on a team-making a big impact on a global scale. At BAE Systems, you'll find a rewarding career that truly makes a difference. Electronic Systems (ES) is the global innovator behind BAE Systems' game-changing defense and commercial electronics. Exploiting every electron, we push the limits of what is possible, giving our customers the edge and our employees opportunities to change the world. Our products and capabilities can be found everywhere - from the depths of the ocean to the far reaches of space. At our core are more than 14,000 highly talented Electronic Systems employees with the brightest minds in the industry, we make an impact - for our customers and the communities we serve. This position will be posted for at least 5 calendar days. The posting will remain active until the position is filled, or a qualified pool of candidates is identified.