• Lead civil and structural engineering design for antenna foundations, equipment pads, radomes, and related site infrastructure • Perform seismic and wind load analyses for antenna systems and supporting structures in compliance with applicable design standards • Conduct viewshed and horizon analyses to validate line-of-sight and sky visibility requirements • Oversee geotechnical investigations, including soil characterization, bearing capacity assessment, and foundation optimization • Review and validate anchor layouts, structural interfaces, and load transfer mechanisms • Coordinate with multidisciplinary teams to align civil designs with system and deployment requirements • Review third-party engineering deliverables for quality, accuracy, and adherence to specifications • Support permitting, zoning, and regulatory approval processes related to site development • Supervise construction activities and contractors to ensure compliance with design, safety, and schedule requirements • Conduct site inspections and quality assurance reviews for concrete works, anchoring systems, and overall site preparation

Role Description Ready to make a difference? ICF is seeking a Substation Civil Structural Engineer with experience performing electric utility substation design engineering and reviews. This individual will be a senior member of a design team comprised of engineers, designers, and drafting technicians and will involve collaboration with physical electrical engineering in the furtherance of designs for utility-level substation and renewable energy projects. What you will be doing: - Develop engineering design drawing and calculation packages from conceptual phase through detailed design and perform design reviews of the aforementioned civil/structural design components in support of the development of bid/construction packages for substation projects. - Ensure that the substation facility meets all applicable safety and environmental regulations, including storm water and Spill Prevention Control and Countermeasure (SPCC) requirements. - Perform site design activities such as determining cut/fill for a grading plan, determining impervious additions and calculating water flow for erosion control and storm water control. - Perform design reviews on a regular basis, as well as developing junior staff members, and contributing to bids and proposal development. - Occasional site-visits to client substation facilities are expected to be part of the work, along with occasional travel for client meetings and industry-related events. - Provide design support to field personnel during project construction. Qualifications - Bachelor of Science degree in Civil Engineering - 5+ years of experience performing electric utility substation design engineering and reviews - PE License in the State of California Requirements - Strong background in design of steel structures, concrete structures, site grading, geotechnical engineering, foundations, and substation access roads, including knowledge of relevant codes and standards. - Experience designing and reviewing substation civil & structure design in seismic areas for both new and existing structures, including transmission dead ends, rigid and strain bus, foundations, oil spill containment, retaining walls, masonry control shelters, pre-engineered and prefabricated buildings, and firewalls. - Familiarity with surveying, geotechnical, and construction specifications, including development and review of same. - Compliance with quality control and safe work practices and maintain compliance with project scope, schedule and budget expectations. - Experience with STAAD.Pro, RISA 3D, FAD Tools, SAFE, SAG10, and LPile software. - Familiarity with AutoCAD Civil 3D and MicroStation, as well as working with georeferenced drawings. CAD operation will generally be performed by Designers/Drafters but skill in these programs is a plus. - Strong analytical and technical writing skills, including proficiency with Microsoft Office (Word/Excel/Powerpoint). - Team player with ability to communicate with clients and staff. Experience in front-facing client operations such as lunch and learns, and kick-off meetings. Benefits - Fully remote, flexible schedule, work-life balance - Donation matching, volunteer opportunities - Tuition reimbursement, access to professional development resources, 401k matching, Employee Stock Purchase Plan - And many, many more (Ask your recruiter for more details!)

• Develop engineering design drawing and calculation packages from conceptual phase through detailed design and perform design reviews of the aforementioned civil/structural design components in support of the development of bid/construction packages for substation projects • Ensure that the substation facility meets all applicable safety and environmental regulations, including storm water and Spill Prevention Control and Countermeasure (SPCC) requirements • Perform site design activities such as determining cut/fill for a grading plan, determining impervious additions and calculating water flow for erosion control and storm water control • Perform design reviews on a regular basis, as well as developing junior staff members, and contributing to bids and proposal development • Occasional site-visits to client substation facilities are expected to be part of the work, along with occasional travel for client meetings and industry-related events • Provide design support to field personnel during project construction.

Role Description As a Team Lead in the Data Center Structural group, you will be responsible for managing a team comprised of engineers, drafters, designers, and/or technicians for utility scale solar projects nationwide. Your primary responsibility will be the accurate, timely, and quality completion of scopes assigned to the team. You will assist in the development of the department's Standard Best Practices (SBPs) and enforce/implement them where pertinent. Team Leads will be a mentor and coach to employees on their team and help them individually as professionals. Essential Responsibilities - Performs and manages the structural engineering scopes of data center facilities. - Produces and reviews full design packages including: - Equipment general arrangement - Site plans - Grading plans - Drainage plans - Pile post plans - Bill of materials - Structure loading diagrams - Structure design and fabrication details - Driven pile design - Concrete slab design - Foundation design - CAB system - Construction details - Permitting - Supporting calculation packages - Develops structural loading for solar trackers and support systems, driven piles, skid and slab mounted equipment, and equipment enclosures using ASCE 7, IBC, CBC, and other appropriate standards. - Designs and analyzes driven pile, concrete drilled piers, footers, slab on grade, and mat type foundations. - Manages selection of equipment, writing equipment specifications, concrete and steel specifications, project and construction cost estimates, and project scheduling. - Works with other project team members to produce project deliverables as assigned. - Oversees project planning, scheduling, and coordination for small to large scale projects. - Supports business development, assists with marketing tasks, and prepares proposals as needed. - Writes and reviews material, construction, and steel specifications. - Reviews submittals for conformance with specifications and design. - Prepares hand and computer-based calculations and models for structural designs; creates a simple hand check to quantify the computer-aided results. - Prepares a variety of documents and reports associated with projects including cost estimates, budget reports, proposals, and studies. - Performs field inspection and construction supervision services. - Checks the work of designers, drafters, and field service personnel for overall quality and ensures accuracy as required. - Researches and evaluates local AHJ design and code requirements and standards. - Interprets requests for proposals for projects, understands scope, and develops cost estimates, schedules, and assumptions. - Assists with client contacts and communication pertaining to specific assignments and meetings. - Engages in lifelong learning to maintain knowledge of contemporary issues. - Provides technical assistance and training for junior engineers. - Assigns work and coordinates work with entry-level engineers, technicians, or administrative staff. - Provides pre-sales technical support to customers and the NEI outside sales team. - Reviews customer specifications and assists in formulating and communicating the commercial strategy to best address customer needs. - Develops and maintains outstanding company-client relationships. - Maintains high ethical and professional standards. - Attends conferences, training workshops, seminars, regular undergraduate, and graduate classes as appropriate for advancement and as required to maintain quality of work. - Attends safety training and adheres to all safety rules and guidelines. - Understands the applications of relevant Codes and Standards. - Other duties as assigned. Qualifications - Education: Bachelor’s in Civil/Structural Engineering or similar field from an accredited institution. - Experience: 5+ years of relevant engineering or field experience. - Licensure: FE is required, PE is preferred. - Proficiency with AutoCAD, modeling, and design software such as SAP2000, L-pile, Mathcad, and AutoCAD Civil 3D, and others. - Experience with Microsoft Office Suite, including Project. - Possess a strong understanding and applications of relevant Codes and Standards such as ASCE 7, ASCE 113, ACI 318, IBC, NESC, RUS Substation Design Guide, and other applicable ASCE, ACI, AISC, ANSI, ASTM, IEC, and IEEE standards for substation design. - Ability to develop staff through mentoring and coaching. - Possesses excellent critical thinking skills. - Commercial understanding of the engineering or construction industries. - Must be self-motivated, well-organized, and a skilled decision maker that is comfortable in a fast-paced design environment. - Possesses effective written and oral communications skills. - Good interpersonal and people skills. - Applicants must be currently authorized to work in the United States on a full-time basis. Nice to Have - Possess a strong understanding of the ASCE 7 loading and applicable IBC, ACI, AISC, ANSI, ASTM, IEC, and IEEE standards for solar plant design. - Proficiency with AutoCAD required or can obtain within six (6) months of employment. - Proficiency or can obtain proficiency within six (6) months of employment with SAP2000, STAAD, Revit, L-pile, or other structural analysis software. Working Conditions - Work Environment: Work is performed in an office setting and some field work is also required. - Travel: Typical: 15 - 25%. - Physical Activities: Team Member is responsible for managing their own work and schedule and the work and schedule of their team with input from their supervisor and completing assigned tasks. The team member will coach, mentor, and develop the employees on their team toward fulfilling their individual career aspirations. - Managerial Responsibility: Team Member should identify discrepancies in assigned work and bring to attention of supervisor or engineer responsible for the project in a timely manner. Team Member team’s work product should be self-checked in a manner that is suitable for review by the supervisor or engineer responsible for the project. Benefits - 100% Employer paid team member premiums for Medical, Dental, Vision, Basic Life Insurance, and Long-Term Disability. - Voluntary Life Insurance. - 401(k) with employer matching; 100% immediate vesting. - Annual discretionary bonus programs. - Paid time off. - Employer paid licensure (FE/PE), certifications, seminars, and conferences. - Paid parental leave. - Tuition reimbursement. - Eight (8) paid holidays, including a floating holiday to use at your discretion. - Annual team building. - Hybrid work environment with remote flexibility. - Career development, training, and coaching opportunities. - Pet insurance.