Role Description - Design of complex analog circuit card assemblies - Design, analysis, and verification of analog circuits for FPGA and microcontroller interfaces (PCIe, SPI, I2C, UART, GPIO, DDR, Ethernet, ARINC, 1553, etc.) - High-speed interface design and signal integrity verification - Circuit design activities including component selection, schematic capture, PCB support, simulation, and testing - Support testing and troubleshooting of systems and sub-assemblies - Work closely with PCB layout and packaging teams - Prepare and review technical documentation (test procedures, specifications, ECOs, reports, etc.) - Collaborate with Engineering, Operations, and Quality teams for defect resolution - Drive design and process improvements to enhance performance and efficiency - Provide training and support to technicians and manufacturing teams - Lead or mentor junior engineers as required - Interface with customers and suppliers - Present designs in internal and customer review meetings - Support legacy design updates and reverse engineering Qualifications - EMI and lightning protection experience - Experience with Siemens (Mentor) DX Designer - Experience with HyperLynx

Role Description Noctrix Health is redefining the treatment of chronic neurological disorders with clinically validated therapeutic wearables. We are seeking an experienced and innovative Principal Electrical Engineer to lead the architecture, design, and development of electrical systems supporting our next-generation therapeutic wearable devices. In this role, you will drive hardware innovation while ensuring designs meet the highest standards for safety, reliability, and performance within regulated medical device environments. The Principal Electrical Engineer will lead full lifecycle hardware development—from concept through manufacturing transfer—while collaborating with cross-functional teams to deliver high-quality, patient-centered products. This role reports to the SVP, Product and plays a critical role in shaping the technical direction of Noctrix Health’s hardware platforms. Responsibilities: - Serve as the technical authority for electrical architecture and hardware design across Noctrix’s therapeutic wearable platforms. - Lead hands-on design and development of complex analog, digital, and mixed-signal circuits for medical device systems, including schematic capture, PCB layout oversight, and component selection. - Architect robust electrical systems that meet the performance, reliability, and safety requirements of prescription medical devices operating in FDA-regulated environments. - Drive full lifecycle hardware development—from early concept and feasibility through detailed design, verification, validation, and transfer to manufacturing. - Perform and guide detailed electrical engineering analysis including signal integrity, power management design, noise mitigation, and system-level performance optimization. - Lead rigorous troubleshooting and root cause investigations for electrical and system-level issues during development, verification testing, and manufacturing. - Develop, review, and maintain high-quality design documentation in compliance with medical device quality systems, including design inputs/outputs, risk analysis, verification protocols, and traceability artifacts. - Ensure electrical designs support regulatory compliance requirements including IEC 60601 safety, EMC, and applicable medical device standards. - Work closely with firmware and systems teams to develop integrated hardware solutions that deliver reliable therapeutic performance and exceptional patient experience. - Mentor engineers and contribute to raising the technical depth and engineering rigor of the hardware team. - Support manufacturing partners and internal teams in design for manufacturability (DFM), testability (DFT), and scale-up to production. - Contribute to the identification and development of new electrical technologies, architectures, and hardware platforms aligned with Noctrix’s long-term product roadmap. Qualifications - B.S. in Electrical Engineering or equivalent technical discipline (M.S. preferred). - Minimum 15 years of experience designing and developing complex electrical systems, preferably in medical devices or other regulated industries (e.g., aerospace, automotive, industrial safety systems). - Deep expertise in analog, digital, and mixed-signal circuit design, including schematic capture, PCB layout guidance, and component selection. - Strong proficiency with Altium Designer or similar professional PCB design tools. - Demonstrated experience architecting and delivering battery-powered embedded systems, including power management, DC-DC conversion, Li-ion battery management, and charging circuitry. - Experience designing systems using microcontrollers and embedded firmware interfaces, with working knowledge of C-based firmware development. - Strong understanding of common embedded communication protocols including USB, I²C, SPI, UART, and BLE. - Experience performing electrical analysis and simulation, including signal integrity, power integrity, and noise mitigation in compact electronic systems. - Experience designing for and supporting EMC/EMI compliance and testing, including familiarity with IEC 60601, EN 61326, or comparable standards. - Demonstrated experience delivering hardware–software integrated products from early concept through verification, validation, and commercialization. - Experience working within regulated development environments, including familiarity with FDA design controls, design history files (DHF), and traceable engineering documentation. - Exceptional hands-on engineering capability, with a proven ability to troubleshoot complex electrical and system-level issues. - Ability to produce clear, rigorous engineering documentation including design analysis, test reports, verification protocols, and design rationale. - Strong communication and collaboration skills across multidisciplinary teams including firmware, mechanical engineering, product management, clinical, and manufacturing teams. - Ability to communicate complex technical concepts clearly to both engineering peers and executive leadership. Requirements - M.S. in Electrical Engineering or a related technical field (preferred). - Experience developing wearable medical devices or compact battery-powered consumer electronics. - Experience designing low-power embedded systems for continuous or wearable operation. - Experience working within medical device quality systems and regulated product development processes (e.g., FDA design controls, ISO 13485). - Demonstrated success leading complex hardware programs from early development through commercialization. - Experience collaborating with contract manufacturers and external development partners during product development and manufacturing scale-up. Benefits - Base pay: $140,000–$160,000 per year + bonus + stock option.

Job Description: Saab, Inc. is seeking a Hardware Configuration Manager with experience developed in aerospace or defense industries, to execute Configuration Management (CM) processes. This role requires expertise in engineering change management, product data structures, engineering drawings and technical data packages, and Configuration Control Board (CCB) administration. The role requires a strong understanding of industry CM standards and CM methodologies applicable to aerospace and defense products. Position Overview: Saab, Inc. is seeking a dynamic, results-oriented Hardware Configuration Manager with proven experience implementing Configuration Management (CM) principles and best practices derived from EIA-649, EIA-649-1, MIL-HDBK-61B. As a technical expert, you will oversee the release and change management of engineering drawings and technical data packages, establishing and maintaining product integrity and traceability throughout the product lifecycle. Reporting to the Manager of Configuration Management, you will support Model-Based Configuration Management (MBCM) and digital engineering initiatives, leveraging process automation and Digital Twin methodologies to enhance real-time configuration tracking. The candidate must be flexible with the ability to prioritize and juggle multiple concurrent tasks in a diverse and competitive environment. This position may be remote, hybrid, or onsite at our Syracuse, NY office. Some travel may be required to support customer audits. Responsibilities Include: - Primary Configuration Management Subject Matter Expert (SME) implementing CM principles and processes to ensure adherence to EIA-649 and Saab standards - Administration and execution of Engineering drawing release and change requests, performing moderate to complex BOM data entry and status accounting in various CM tools - Maintain CM records, baseline management, and data repositories to ensure configuration traceability. - Ownership of the Engineering BOM and item master (Oracle ERP) - BOM accuracy through validation of engineering definition and revision implementation - Support Model-Based Configuration Management (MBCM) and integration with digital engineering environments. - Configuration Control Board facilitation and administration ensuring structured decisions - Ensure conformance to applicable company and industry CM and engineering drawing standards - Requirements analysis for proposals, costing, CM planning - Perform data entry, manipulating/analyzing data as required - Contribute to Functional and Physical Configuration Audits (FCA, PCA) - Utilize defect tracking and version control systems - Proactively define and implement tasks for self and others - Train or mentor CM and other professionals ensuring knowledge transfer and skill development Typical Salary Range: $80,900 - 101,100 for our Syracuse, NY, New York Remote, Orlando, FL, Remote Florida, Remote Arizona locations. $97,000 - $121,300 for our Washington, DC Remote, Quincy, MA, locations. The compensation range provided is a general guideline. When extending an offer, Saab, Inc. considers factors including (but not limited to) the role and associated responsibilities, location, and market and business considerations, as well as the candidate's work experience, key skills, and education/training. Skills and Experience: Experience and Skills: - BA/BS degree in a technical discipline - 8+ years of relevant experience with working knowledge of Configuration Management processes OR - MA/MS degree in a technical discipline - 6+ years of relevant experience within aerospace, defense, or high-tech industries Required Skills: - Expertise in engineering change and release processes, CCB facilitation, and CM data integrity - Experience using PLM, Teamcenter preferred - Working knowledge of EIA-649, EIA-649-1, MIL-HDBK-61B - Experience with MRP/ERP systems, Oracle ERP preferred - Exceptional attention to detail, troubleshooting, and problem-solving skills - Excellent verbal and written communication skills - Ability to multi-task, set priorities, and manage time responsibly - Capable of working without direct guidance or direction - Experience with Adobe Acrobat or equivalent Desired Skills: - NDIA or CMPIC Configuration Management Certification - Experience in Digital Engineering and Model-Based Configuration Management (MBCM). - Prior experience conducting FCA/PCA and leading CM audits - Experience using SolidWorks, Solid Edge, Altium - Experience using the Atlassian JIRA/Confluence/Crucible tool sets Citizenship Requirements: Must be a U.S. citizen. Applicants selected may be subject to a government security investigation and must meet eligibility requirements for access to classified information. Drug-Free Workplaces: Saab is a federal government contractor and adheres to policies and programs necessary for sustaining drug-free workplaces. As a condition of employment, candidates will be required to pass a pre-employment drug screen. Benefits: Saab provides an excellent working environment offering professional growth opportunities, competitive wages, work-life balance, a business casual atmosphere and comprehensive benefits. Highlights include: - Medical, vision, and dental insurance for employees and dependents - Generous paid time off, including 8 designated holidays - 401(k) with employer contributions - Tuition assistance and student loan assistance - Wellness and employee assistance resources - Employee stock purchase opportunities - Short-term and long-term disability coverage About Us: Saab is a leading defense and security company with an enduring purpose, to help nations keep their people and society safe. Empowered by its 28,000 talented people, Saab constantly pushes the boundaries of technology to create a safer and more sustainable world. In the U.S., Saab delivers advanced technology and systems, supporting the U.S. Armed Forces and the Federal Aviation Administration, as well as international and commercial partners. Headquartered in Syracuse, New York, the company has business units and local employees in ten U.S. locations. Saab is a company where we see diversity as an asset and offer unlimited opportunities for advancing in your career. We are also a company that respects each person’s needs and encourage employees to lead a balanced, rewarding life beyond work. Saab values diversity and is an Affirmative Action employer for protected veterans and individuals with disabilities. Saab is an Equal Employment Opportunity employer, all qualified individuals are encouraged to apply and will be considered for employment without regard to race, color, religion, national origin, sex (including pregnancy), sexual orientation, gender identity, age, veteran, disability status, or any other federal, state, or locally protected category.

• Lead the full product development lifecycle from concept to production, including electronics, firmware/software, and enclosure design. • Design new products to expand Timescapes’ hardware catalog. • Create and maintain software across high-level software applications, embedded linux systems, and low level microcontroller firmware. • Refine & improve existing established Timescapes products. • Manage & coordinate with external industrial design and contract manufacturing (CM) partners. • Collaborate with manufacturing houses to oversee prototype builds, testing procedures, and production transition. • Establish relationships with suppliers locally and overseas for core components such as batteries, modules, and cable assemblies. • Work with supply chain and logistics teams to support production, component sourcing, and distribution. • Create and maintain comprehensive design documentation, build instructions, test plans, and manufacturing guides.