Strategic Management Solutions, LLC.

SMSI provides expert management consulting, program and project management, and technical consulting services to government and private sector clients. SMSI has grown and evolved by building an outstanding reputation for client-focused performance and for delivering results that enable clients to meet commitments and milestones.   SMSI is an Equal Employment Opportunity employer, all qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, disability, or status as a protected veteran SMSI is looking for a Supplier Quality Representative to support work for our client, Savannah River Site. This is a full-time position and can be a flex work schedule. This role is remote and can be located anywhere in the U.S. but will require extensive travel weekly if not located in the Ogden, UT. Job Summary: Provides Supplier Quality Surveillance at assigned supplier shops. Follows management instructions, project procedures, Corporate Procurement Procedures. Ensures that project is provided with effective surveillance inspection service. Performs supplier surveys to ensure the overall organizational effectiveness among all functions. Responsibilities: - Maintains direct working relationships with Project Management, Project and Field Engineering, Construction, Project Controls, Procurement personnel to ensure mutual understanding, development, and attainment of objectives. - Maintains contacts with inspection agency representatives to ensure that their service will conform to standards. - Maintains relationships with supplier’s management personnel for resolution of quality problems as disclosed by surveillance inspection and audit activities and recommends corrective action to prevent recurrence. - Performs supplier quality functions to ensure that quality surveillance activities are planned, coordinated, and implemented in a timely and effective manner. Analyzes the effectiveness and of established quality surveillance systems and techniques. Makes improvements when necessary. - Takes direction and management guidance from Project Supplier Quality Lead, Follows project and supplier quality procedures working close with project personnel. - Reviews the project Schedule, performs detailed supplier Hold, Witness and In Process surveillance points, and actual progress of each process point to confirm that materials meet the highest quality standard. Reviews any schedule revisions for impacts and participates in the development of contingency planning. - Works with project SQ and Quality Management, Procurement Representatives, Expediting, and Responsible Engineers. - Monitors suppliers effectiveness of operations to determine that materials and equipment produced by suppliers conform to technical quality requirements of the applicable specifications. - Ensures adherence to Government property control provisions and to ensure implementation of any requirements in this regard with project personnel. - Performs review of Supplier Quality assurance programs. Reviews with Quality personnel at the project regarding suppliers and their quality assurance programs. Reports out to project supplier quality when issues arise. - Exercises authority in conjunction with Project Supplier Quality to require correct action by a supplier to repair (or replace) defective work. - Monitors the performance at supplier’s facilities and submits reports after each supplier visit. Requirements: - Certified Welding Inspector (CWI) - SQR = 6,000 hours of Inspection experience. - Knowledge of policies, directives, management instructions, and Procurement procedures. - Knowledge of interface relationships with functional groups such as Engineering, Construction, Project Management. - Experience with high degree of skill in Surveillance and Inspection techniques. - Training in Quality, Procurement and Engineering administration, process improvement initiatives, as well as the legal aspects of procurement. - Knowledge of major suppliers equipment and materials used on project. - Possesses multi-project experience performing surveillance, inspection activities. - Possesses Level II Supplier Quality/Inspection certifications for Mechanical, or Electrical, NDE knowledge. Must have at least 8,000 hours of method experience. - Extensive Knowledge of ISO and/or ANSI, 10CFR50 and NQA-1 quality management requirements. - Knowledge of Federal Acquisition Regulations, and applicable Agency Supplements. - Understanding of Governmental Contracts and the flow-down of applicable clauses and requirements. - Experience in Government property control. - Knowledge of applicable Government and commercial regulations and practices. - Knowledge of Field Engineering and Construction activities, and knowledge of Standard Work Process Procedures related to materials management functions. Educational Requirements: - High school diploma. Travel: Position will require extensive travel to and from office to supplier’s shops depending on location.

SMSI provides expert management consulting, program and project management, and technical consulting services to government and private sector clients. SMSI has grown and evolved by building an outstanding reputation for client-focused performance and for delivering results that enable clients to meet commitments and milestones.   SMSI is an Equal Employment Opportunity employer, all qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, disability, or status as a protected veteran. Job Summary The Delivery Manager is responsible for the execution and delivery of critical materials and equipment, while providing guidance to the project team (Engineering, Quality, Procurement, and other functions) and supplier(s), to ensure materials/equipment comply with technical and commercial contract requirements. In doing so, PM must develop an understanding of the supplier(s) and customer processes and procedures to effectively manage the scope of work. The complexity of the work requires the PM to identify and propose innovative means and methods to advance the work without creating undue risk to the project. This position may be remote but will require significant travel. Applicants should ideally be located in the following regions: Blackfoot, ID. Job Responsibilities - Reports directly to the Project Delivery Manager while also reporting to Control Account Managers for respective projects. - Coordinates work activities with Engineering, Procurement, Construction and other Stakeholders required to support delivery of materials/equipment. - Routinely interfaces with project Control Account Managers to provide status of overall supplier performance, including schedule performance and cost performance, as required, related to the assigned scope of work. - Performs other related job duties as directed by project stakeholders. - Manage delivery of materials/equipment and documentation (technical/quality) to support project mission directives. - Maintain key/critical supplier relationships with project and supplier stakeholders. - Work with applicable teams (Engineering, Procurement, Construction, etc.) to perform technical, quality, cost and schedule evaluations to determine risks and mitigation actions. - Develop key performance indicators (KPIs) to manage outcomes. - Demonstrated experience with development of safety class and safety significant designs. - Advanced experience working with design and construction contracts. - Advanced experience in cost functions, including cost estimating, cost control, financial reporting systems, and cost and variance analysis. - Review technical and commercial documents for compliance to contract requirements. - Attend all pertinent project meetings and reports overall progress and recommendations to project stakeholders. - May be responsible for development, maintenance, and distribution of an integrated action items list to support resolution of barriers pertaining to overall execution and delivery. - Provide technical recommendations to Project Engineering and the supplier(s) to mitigate cost and schedule risks. - Work collaboratively with supplier(s) and project(s) to resolve supplier deviations and scope changes to mitigate schedule, quality, and cost risks. - As requested, provide daily updates on work completed against plan along with a prioritized list of actions impacting progress. - Act as the primary supplier contact to ensure communication is clear and concise. - Responsible for development and evaluation of relevant metrics to proactively mitigate delivery risks. - Identify any supplier(s) weaknesses or opportunities and provide recommendations to overcome gaps. - Designate time to observe work being performed in the shop to validate and verify schedule progress and performance. - Monitor quality driven impacts and facilitate closure of non-conformance reports (NCRs) or supplier corrective action reports (CARs). - Validate and verify completion of commercial payment progress milestones. - Travel to supplier/vendor locations to ensure comprehensive understanding of scope to drive supplier performance. Significant travel of 100% in support of work being performed in shops. Required Skills/ Abilities - Advanced experience in engineering, manufacturing, fabrication, quality and scheduling. - Two (2) years of Project or Program Management. - Five (5) years of experience working in a DOE/NNSA NQA-1 environment. - Advanced knowledge of Microsoft Projects and/or Oracle P6 scheduling software. - Advanced knowledge in reading and interpreting fabrication drawings, codes and specifications. - Two (2) years of experience with Government contracting. - U.S. Citizenship Education Requirement - Bachelor’s degree Supply Chain Management or Engineering discipline (e.g. Industrial, Civil, Mechanical, or Electrical Engineering), and ten (10) years of relevant experience. - OR, a Master's degree: Five (5) years of relevant experience. - OR fifteen (15) or more years of relevant education and/or relevant experience may be considered to satisfy educational and years-of-experience requirements for this posting. Preferred Qualifications: - APICS Certifications - Project Management Professional (PMP) Certification - Professional registration as a professional engineer - Current or previous certification in Earned Value Management systems (EVMS), including experience with successful implementation and maintenance of EVMS to help manage a project/program.

SMSI provides expert management consulting, program and project management, and technical consulting services to government and private sector clients. SMSI has grown and evolved by building an outstanding reputation for client-focused performance and for delivering results that enable clients to meet commitments and milestones.   . SMSI is an Equal Employment Opportunity employer, all qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, disability, or status as a protected veteran. Job Summary SMSI LLC is seeking a Solutions Data Architect to assist our client, Los Alamos National Laboratory (LANL). This position will be mostly remote, with occasional trips onsite in Los Alamos, NM as needed. Responsibilities Los Alamos National Laboratory has selected SAP for their next-generation Cloud ERP solution. In parallel, they will require a future state data strategy to take advantage of new tools and technology to help modernize their current on-prem operational data store. This work plays a critical role in supporting key institutional initiatives such as enabling real-time analytics, AI/ML capabilities, and enhanced operational efficiency. This role will be critical in transformation of their legacy data environment into a modern, cloud-native architecture. In concert with institutional knowledge experts and ERP implementation planner and integrators, you will define the data strategy, standards, and blueprints for migrating and integrating high-volume operational data into a new platform, ensuring data integrity, security, and accessibility across the enterprise. Job Requirements - •5+ years of progressive experience in data architecture, data modernization, and cloud-based data solutions. - Extensive experience implementing solutions with at least one or more of the following: Snowflake, Databricks, and/or SAP data platforms (S/4HANA, Datasphere, etc) - Proven experience as a senior data architect or equivalent, with demonstrated leadership on large-scale architecture projects. - Proven work experience in designing and implementing complex data architecture, with significant experience in data warehousing, and large-scale data modernization projects. - Strong understanding of major cloud platforms and their native data services. - Extensive data migration experience from on-prem to cloud systems and cloud to cloud. - Proven ability to work with cross-functional teams, including business analysts, ERP functional consultants, developers, and infrastructure teams. - Strong stakeholder management skills with a track record of presenting architecture decisions to executive leadership. - Experience with leading a team and providing technical direction to personnel for a wide variety of projects and initiatives. - Excellent verbal and written communication skills. - Candidate must have the ability to work with many team members across multiple disciplines. - US Citizenship is required. Preferred Qualifications - Master’s degree in Computer Science, Information Systems, or related technical discipline. - Experience with SAP BDC (Business Data Cloud), SAP BTP (Business Technology Platform), and Integration Suite. - Lead architectural decisions around data platforms (e.g. Snowflake, Databricks, Data Lakes, Data Lakehouses, ETL/ELT, streaming architecture). - Experience in designing and implementing a comprehensive data catalog to improve data discovery and governance. - Experience with big data technologies and machine learning concepts. - ERP certification or training (e.g., SAP Data Architect, Oracle ERP Cloud, Workday Integration). - Experience implementing or supporting data governance programs, especially in ERP environments. - Familiarity with data privacy regulations and compliance requirements relevant to ERP data (e.g., SOX, GDPR, HIPAA). - Active (or recent) Q clearance is a plus but not required. Education Requirements - Bachelor’s degree, preferably in computer science, engineering, information systems, or related discipline, along with 12 years of experience. Equivalent combination of education and experience will be considered. - Certifications are a plus.

SMSI provides expert management consulting, program and project management, and technical consulting services to government and private sector clients. SMSI has grown and evolved by building an outstanding reputation for client-focused performance and for delivering results that enable clients to meet commitments and milestones.   SMSI is an Equal Employment Opportunity employer, all qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, disability, or status as a protected veteran. Job Summary SMSI is hiring a Nuclear Safety Basis Analyst to support various facilities. The Nuclear Safety Basis Analyst will support the Nuclear Safety organization in the development of nuclear safety documentation for various facilities. Responsibilities - Performs nuclear and non-nuclear risk and hazard analyses to ensure safe operation of nuclear and/or non-nuclear facilities. - Specific duties may include, but are not necessarily limited to; hazard identification, hazard analysis, facility hazard categorization, accident analysis, selection of controls, and development of associated safety basis documents including un-reviewed safety question determinations, documented safety analysis, technical safety requirements, safety assessment documents, facility safety plans, and facility safety analysis. - Provide technical assistance in the development of documented safety analyses, technical safety requirements, and related technical support documentation in accordance with industry and company quality standards. - Ensure that the developed nuclear safety documentation complies with requirements and as necessary, applicable controls are implemented in implementing procedures. - Identify and tailor applicable functional, operational, and regulatory compliance-based requirements for missions, projects, and activities. - Support safety basis implementation and readiness activities at NNSA facilities. - Provide expert level knowledge of integrating nuclear safety requirements to new missions, facilities, and projects. - Work with a team of exceptional professionals to analyze and solve technical nuclear safety issues. - Working knowledge of the USQ process. Required Skills/Abilities - Minimum 5–8 years of relevant experience in nuclear safety industry through support of the Department of Energy (DOE), National Nuclear Security Administration (NNSA), and/or the commercial nuclear industry. - Previous experience with the use and implementation of 10 CFR 830, DOE O 420.1C, DOE STD-3009, DOE STD-1189, and related directives and standards is required. - Working knowledge of the USQ process is required. - Previous experience in developing and maintaining safety analysis and related documents is preferred at a DOE or NNSA site. - Candidate must demonstrate personal accountability for facility/project schedules, deadlines, budgets, and the safe performance of work. - Candidate must be a US Citizen. - Candidate must have the ability to obtain and maintain a DOE “Q” security clearance. - Must be able to interface with government program representatives on high-level, technical, and project issues. - Ability to successfully make quick decisions and meet goals while working under time constraints. - Possess planning, organizational, and analytical skills. - Demonstrated keen attention to detail. - Possess communication and interpersonal skills. - Apply proven technical knowledge working with multiple functional areas to provide comprehensive recommendations. - Ability to multi-task between changing requirements and priorities. - Requires a motivated self-starter who pays attention to details to support assignments while functioning in a time-sensitive, fluid environment. Education - Bachelor’s degree in nuclear, engineering, math, or science preferred. - Alternate combination of education and experience will be considered where candidate has an advanced degree. ** This is a remote position that may require minimal travel onsite as needed to the Los Alamos, NM area.**

SMSI provides expert management consulting, program and project management, and technical consulting services to government and private sector clients. SMSI has grown and evolved by building an outstanding reputation for client-focused performance and for delivering results that enable clients to meet commitments and milestones.   SMSI is an Equal Employment Opportunity employer, all qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, disability, or status as a protected veteran. Job Summary The Delivery Manager is responsible for the execution and delivery of critical materials and equipment, while providing guidance to the project team (Engineering, Quality, Procurement, and other functions) and supplier(s), to ensure materials/equipment comply with technical and commercial contract requirements. In doing so, PM must develop an understanding of the supplier(s) and customer processes and procedures to effectively manage the scope of work. The complexity of the work requires the PM to identify and propose innovative means and methods to advance the work without creating undue risk to the project. This position may be remote but will require significant travel. Applicants should ideally be located in the following regions: Attleborough,MA and Stratham,NH Job Responsibilities - Reports directly to the Project Delivery Manager while also reporting to Control Account Managers for respective projects. - Coordinates work activities with Engineering, Procurement, Construction and other Stakeholders required to support delivery of materials/equipment. - Routinely interfaces with project Control Account Managers to provide status of overall supplier performance, including schedule performance and cost performance, as required, related to the assigned scope of work. - Performs other related job duties as directed by project stakeholders. - Manage delivery of materials/equipment and documentation (technical/quality) to support project mission directives. - Maintain key/critical supplier relationships with project and supplier stakeholders. - Work with applicable teams (Engineering, Procurement, Construction, etc.) to perform technical, quality, cost and schedule evaluations to determine risks and mitigation actions. - Develop key performance indicators (KPIs) to manage outcomes. - Demonstrated experience with development of safety class and safety significant designs. - Advanced experience working with design and construction contracts. - Advanced experience in cost functions, including cost estimating, cost control, financial reporting systems, and cost and variance analysis. - Review technical and commercial documents for compliance to contract requirements. - Attend all pertinent project meetings and reports overall progress and recommendations to project stakeholders. - May be responsible for development, maintenance, and distribution of an integrated action items list to support resolution of barriers pertaining to overall execution and delivery. - Provide technical recommendations to Project Engineering and the supplier(s) to mitigate cost and schedule risks. - Work collaboratively with supplier(s) and project(s) to resolve supplier deviations and scope changes to mitigate schedule, quality, and cost risks. - As requested, provide daily updates on work completed against plan along with a prioritized list of actions impacting progress. - Act as the primary supplier contact to ensure communication is clear and concise. - Responsible for development and evaluation of relevant metrics to proactively mitigate delivery risks. - Identify any supplier(s) weaknesses or opportunities and provide recommendations to overcome gaps. - Designate time to observe work being performed in the shop to validate and verify schedule progress and performance. - Monitor quality driven impacts and facilitate closure of non-conformance reports (NCRs) or supplier corrective action reports (CARs). - Validate and verify completion of commercial payment progress milestones. - Travel to supplier/vendor locations to ensure comprehensive understanding of scope to drive supplier performance. Significant travel of 100% in support of work being performed in shops. Required Skills/ Abilities - Advanced experience in engineering, manufacturing, fabrication, quality and scheduling. - Two (2) years of Project or Program Management. - Five (5) years of experience working in a DOE/NNSA NQA-1 environment. - Advanced knowledge of Microsoft Projects and/or Oracle P6 scheduling software. - Advanced knowledge in reading and interpreting fabrication drawings, codes and specifications. - Two (2) years of experience with Government contracting. - U.S. Citizenship Education Requirement - Bachelor’s degree Supply Chain Management or Engineering discipline (e.g. Industrial, Civil, Mechanical, or Electrical Engineering), and ten (10) years of relevant experience. - OR, a Master's degree: Five (5) years of relevant experience. - OR fifteen (15) or more years of relevant education and/or relevant experience may be considered to satisfy educational and years-of-experience requirements for this posting. Preferred Qualifications: - APICS Certifications - Project Management Professional (PMP) Certification - Professional registration as a professional engineer - Current or previous certification in Earned Value Management systems (EVMS), including experience with successful implementation and maintenance of EVMS to help manage a project/program.

SMSI provides expert management consulting, program and project management, and technical consulting services to government and private sector clients. SMSI has grown and evolved by building an outstanding reputation for client-focused performance and for delivering results that enable clients to meet commitments and milestones.   SMSI is an Equal Employment Opportunity employer, all qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, disability, or status as a protected veteran. Job Summary The Delivery Manager is responsible for the execution and delivery of critical materials and equipment, while providing guidance to the project team (Engineering, Quality, Procurement, and other functions) and supplier(s), to ensure materials/equipment comply with technical and commercial contract requirements. In doing so, PM must develop an understanding of the supplier(s) and customer processes and procedures to effectively manage the scope of work. The complexity of the work requires the PM to identify and propose innovative means and methods to advance the work without creating undue risk to the project. This position may be remote but will require significant travel. Applicants should ideally be located in the following regions: Huntsville, AL. Job Responsibilities - Reports directly to the Project Delivery Manager while also reporting to Control Account Managers for respective projects. - Coordinates work activities with Engineering, Procurement, Construction and other Stakeholders required to support delivery of materials/equipment. - Routinely interfaces with project Control Account Managers to provide status of overall supplier performance, including schedule performance and cost performance, as required, related to the assigned scope of work. - Performs other related job duties as directed by project stakeholders. - Manage delivery of materials/equipment and documentation (technical/quality) to support project mission directives. - Maintain key/critical supplier relationships with project and supplier stakeholders. - Work with applicable teams (Engineering, Procurement, Construction, etc.) to perform technical, quality, cost and schedule evaluations to determine risks and mitigation actions. - Develop key performance indicators (KPIs) to manage outcomes. - Demonstrated experience with development of safety class and safety significant designs. - Advanced experience working with design and construction contracts. - Advanced experience in cost functions, including cost estimating, cost control, financial reporting systems, and cost and variance analysis. - Review technical and commercial documents for compliance to contract requirements. - Attend all pertinent project meetings and reports overall progress and recommendations to project stakeholders. - May be responsible for development, maintenance, and distribution of an integrated action items list to support resolution of barriers pertaining to overall execution and delivery. - Provide technical recommendations to Project Engineering and the supplier(s) to mitigate cost and schedule risks. - Work collaboratively with supplier(s) and project(s) to resolve supplier deviations and scope changes to mitigate schedule, quality, and cost risks. - As requested, provide daily updates on work completed against plan along with a prioritized list of actions impacting progress. - Act as the primary supplier contact to ensure communication is clear and concise. - Responsible for development and evaluation of relevant metrics to proactively mitigate delivery risks. - Identify any supplier(s) weaknesses or opportunities and provide recommendations to overcome gaps. - Designate time to observe work being performed in the shop to validate and verify schedule progress and performance. - Monitor quality driven impacts and facilitate closure of non-conformance reports (NCRs) or supplier corrective action reports (CARs). - Validate and verify completion of commercial payment progress milestones. - Travel to supplier/vendor locations to ensure comprehensive understanding of scope to drive supplier performance. Significant travel of 100% in support of work being performed in shops. Required Skills/ Abilities - Advanced experience in engineering, manufacturing, fabrication, quality and scheduling. - Two (2) years of Project or Program Management. - Five (5) years of experience working in a DOE/NNSA NQA-1 environment. - Advanced knowledge of Microsoft Projects and/or Oracle P6 scheduling software. - Advanced knowledge in reading and interpreting fabrication drawings, codes and specifications. - Two (2) years of experience with Government contracting. - U.S. Citizenship Education Requirement - Bachelor’s degree Supply Chain Management or Engineering discipline (e.g. Industrial, Civil, Mechanical, or Electrical Engineering), and ten (10) years of relevant experience. - OR, a Master's degree: Five (5) years of relevant experience. - OR fifteen (15) or more years of relevant education and/or relevant experience may be considered to satisfy educational and years-of-experience requirements for this posting. Preferred Qualifications: - APICS Certifications - Project Management Professional (PMP) Certification - Professional registration as a professional engineer - Current or previous certification in Earned Value Management systems (EVMS), including experience with successful implementation and maintenance of EVMS to help manage a project/program.

SMSI provides expert management consulting, program and project management, and technical consulting services to government and private sector clients. SMSI has grown and evolved by building an outstanding reputation for client-focused performance and for delivering results that enable clients to meet commitments and milestones.   SMSI is an Equal Employment Opportunity employer, all qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, disability, or status as a protected veteran. Job Summary The Delivery Manager is responsible for the execution and delivery of critical materials and equipment, while providing guidance to the project team (Engineering, Quality, Procurement, and other functions) and supplier(s), to ensure materials/equipment comply with technical and commercial contract requirements. In doing so, PM must develop an understanding of the supplier(s) and customer processes and procedures to effectively manage the scope of work. The complexity of the work requires the PM to identify and propose innovative means and methods to advance the work without creating undue risk to the project. This position may be remote but will require significant travel. Applicants should ideally be located in the following regions: Mauston, WI. Job Responsibilities - Reports directly to the Project Delivery Manager while also reporting to Control Account Managers for respective projects. - Coordinates work activities with Engineering, Procurement, Construction and other Stakeholders required to support delivery of materials/equipment. - Routinely interfaces with project Control Account Managers to provide status of overall supplier performance, including schedule performance and cost performance, as required, related to the assigned scope of work. - Performs other related job duties as directed by project stakeholders. - Manage delivery of materials/equipment and documentation (technical/quality) to support project mission directives. - Maintain key/critical supplier relationships with project and supplier stakeholders. - Work with applicable teams (Engineering, Procurement, Construction, etc.) to perform technical, quality, cost and schedule evaluations to determine risks and mitigation actions. - Develop key performance indicators (KPIs) to manage outcomes. - Demonstrated experience with development of safety class and safety significant designs. - Advanced experience working with design and construction contracts. - Advanced experience in cost functions, including cost estimating, cost control, financial reporting systems, and cost and variance analysis. - Review technical and commercial documents for compliance to contract requirements. - Attend all pertinent project meetings and reports overall progress and recommendations to project stakeholders. - May be responsible for development, maintenance, and distribution of an integrated action items list to support resolution of barriers pertaining to overall execution and delivery. - Provide technical recommendations to Project Engineering and the supplier(s) to mitigate cost and schedule risks. - Work collaboratively with supplier(s) and project(s) to resolve supplier deviations and scope changes to mitigate schedule, quality, and cost risks. - As requested, provide daily updates on work completed against plan along with a prioritized list of actions impacting progress. - Act as the primary supplier contact to ensure communication is clear and concise. - Responsible for development and evaluation of relevant metrics to proactively mitigate delivery risks. - Identify any supplier(s) weaknesses or opportunities and provide recommendations to overcome gaps. - Designate time to observe work being performed in the shop to validate and verify schedule progress and performance. - Monitor quality driven impacts and facilitate closure of non-conformance reports (NCRs) or supplier corrective action reports (CARs). - Validate and verify completion of commercial payment progress milestones. - Travel to supplier/vendor locations to ensure comprehensive understanding of scope to drive supplier performance. Significant travel of 100% in support of work being performed in shops. Required Skills/ Abilities - Advanced experience in engineering, manufacturing, fabrication, quality and scheduling. - Two (2) years of Project or Program Management. - Five (5) years of experience working in a DOE/NNSA NQA-1 environment. - Advanced knowledge of Microsoft Projects and/or Oracle P6 scheduling software. - Advanced knowledge in reading and interpreting fabrication drawings, codes and specifications. - Two (2) years of experience with Government contracting. - U.S. Citizenship Education Requirement - Bachelor’s degree Supply Chain Management or Engineering discipline (e.g. Industrial, Civil, Mechanical, or Electrical Engineering), and ten (10) years of relevant experience. - OR, a Master's degree: Five (5) years of relevant experience. - OR fifteen (15) or more years of relevant education and/or relevant experience may be considered to satisfy educational and years-of-experience requirements for this posting. Preferred Qualifications: - APICS Certifications - Project Management Professional (PMP) Certification - Professional registration as a professional engineer - Current or previous certification in Earned Value Management systems (EVMS), including experience with successful implementation and maintenance of EVMS to help manage a project/program.